Service, Quality & Innovation
Manufactured in Toronto, Exacta press brake products incorporate years of industry experience and are available through the global sales and distribution network of Wilson Tool.
Exacta Conventional Press Brake tooling is engineered to meet the needs of Sheet Metal Fabricators around the world. Exacta has the ability to manufacture high quality Standard Forming tools in one-piece lengths of up to 20 feet or the same tool in sections of any desirable length.
The Exacta Acute punch is best used for air bending 30 to 90 degree angles.
The Exacta Gooseneck punch is used for making channels or parts with a return flange that requires deep relief in the middle of the punch.
Wilson Tool Radius Tool Holders with Replaceable Tips allow you to replace the tip of the punch allowing you to quickly change the radius of the punch.
The Exacta 1V die is offered with V openings ranging from .157” to 4.9” with an angle range from 90 degrees to 30 degrees.
The Exacta Hemming/Flattening dies are used to flatten or hem a part after a 30-degree bend has been made.
The Exacta Adjustable V dies are a great solution when bending thick materials and you need the flexibility to adjust the width of the V opening.
The Exacta Block punch is wide with a large radius allowing it to be used on higher tonnage applications or on heavier materials.
The Exacta Hemming/Flattening punches are used to flatten or hem a part after a 30-degree bend has been made.
The Exacta Sash punch is very narrow with an angled tip, which is ideal for making a door sash or jamb.
The Exacta 4-Way die offers multiple V openings on one single block.
Also known as Z bends or Joggles, the Exacta Offset punch and die set is able to make two bends at the same time.