Tooling Times e-Newsletter - November 2013 | Wilson Tool
In order to provide complete functionality, this web site needs your explicit consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the web site including but not limited to: log in, buy products, see personalized content, switch between site cultures. It is recommended that you allow all cookies.

Tooling Times e-Newsletter - November 2013

When punching holes in sheet metal, the die must be larger than the punch. Depending on the material type and thickness, the die might be oversized by 20% of the thickness (10% per side). During punching, the top portion of the hole shears straight down roughly one third of the metal thickness, then the material breaks away toward the edge of the die.

Thanks for visiting Wilson Tool.

Unfortunately our site requires cookies to be enabled in order to use our live chat feature. Please call 1-866-752-6531 to speak with a Wilson Tool representative, or fill out our contact form.

Thanks for visiting Wilson Tool.

Please call 1-866-752-6531 to speak with a Wilson Tool representative, or fill out our contact form.

Subscribe Now