Forming Templates and Samples

Ordering Templates

Due to the wide variety of sizes and forms possible with lance and form tools, the best way to ensure accuracy is to send in a file of the form you are trying to make and/or your part. Wilson Tool accepts many file types including, but not limited to, SOLIDWORKS, PDF, DXF and IGS.

The following punching templates will assist you in ordering the right tool the first time.

For help with these templates and more, contact our Tooling Technicians at punching@wilsontool.com or 800-328-9646.


Bridge Lance & Form

Bridge type lance and forms can be used for shear stops, locators, card guides, dividers, ventilation and wire tie downs.


Card Guide

Card guides are used for retaining printed circuit board that require standard lead-in or special lead-in shapes.


Cluster Tool

Cluster tools are used to punch several holes with one hit which reduces sheet distortion and oil canning in perforating applications.


Coining Tool

Coining operations on the punch press eliminate the costly and time-consuming secondary operation of drilling countersinks and produce a consistent and clean form.


EKO Round

Electrical Knockouts (EKOs) are used to create connection points for cable pathways and are available in a variety of sizes.


EKO Shape

Electrical Knockouts (EKOs) are used to create connection points for cable pathways and are available in a variety of shapes and sizes. 


Emboss

Emboss forming tools are useful for creating stand-offs, spacers, large countersinks and locks for nuts.


Extrusion

Extrusions can be used in a broad spectrum of applications, such as self-tapping screws, cooling tube holders, air flow applications or tread plate.


Half Shear/Rooftop Half Shear

Half shears are an easy-to-use tool that allows you to put in shear buttons and spot-welding locators to the accuracy of your punch press.


Hinge Tool

Hinge tools allow you to fabricate complete panels with integrated hinges which allows for the elimination of costly hardware, fitting and line-up assemblies.


Lance & Form of 90°

Lance and Forms are a great tool for a variety of applications, including air flow, decoration, card guides, location markers, shear tabs, wire harnesses and clip attachments.


Lance & Form Extra Bend

Lance and Forms are a great tool for a variety of applications, including air flow, decoration, card guides, location markers, shear tabs, wire harnesses and clip attachments.


Lance & Form <90°

Lance and Forms are a great tool for a variety of applications, including air flow, decoration, card guides, location markers, shear tabs, wire harnesses and clip attachments.


Lance & Form Shovel

Lance and Forms are a great tool for a variety of applications, including air flow, decoration, card guides, location markers, shear tabs, wire harnesses and clip attachments.


Louvers

Louvers are used in a variety of industry applications that require airflow; electrical enclosures, HVAC, and food service equipment.


Progressive Rib

Progressive Rib forms produces quality stiffening ribs of various lengths through programing.


Rollover Tool

The Rollover or Curling tool can be used in many applications such as hand holds, wire feeds and grommets. This tool reduces costly secondary operations and handling.


Thread Form

Thread Forms are a great solution for eliminating secondary operations and supplemental hardware where a threaded hole is required.


Thread Loop

Thread Loops are a great solution for eliminating secondary operations and supplemental hardware where a threaded hole is required.

 

Contact Our Tooling Technicians

Our technically trained representatives are waiting to help you.

Thanks for visiting Wilson Tool.

Unfortunately our site requires cookies to be enabled in order to use our live chat feature. Please call 1-866-752-6531 to speak with a Wilson Tool representative, or fill out our contact form.